Raspberry Pi Pico W
See full data sheet
Pico development
Added documentation
Choose from 1-pack or 3-pack with FREE US shipping at checkout.Ā
The RaspberryĀ PiĀ Pico series is a range of tiny, fast, and versatile boards built using RP2040, the flagship microcontroller chip designed by RaspberryĀ Pi in the UK
Model: Pico W (with wireless)
Raspberry Pi Pico W adds on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW43439 while retaining the Pico form factor. The on-board 2.4GHz wireless interface has the following features:
-
Wireless (802.11n), single-band (2.4 GHz)
-
WPA3
-
Soft access point supporting up to four clients
The antenna is an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected via SPI to theĀ RP2040Ā microcontroller.
Due to pin limitations, some of the wireless interface pins are shared. The CLK is shared with VSYS monitor, so only when there isnāt an SPI transaction in progress can VSYS be read via the ADC. The Infineon CYW43439 DIN/DOUT and IRQ all share one pin on the RP2040. Only when an SPI transaction isnāt in progress is it suitable to check for IRQs. The interface typically runs at 33MHz.
For best wireless performance, the antenna should be in free space. For instance, putting metal under or close by the antenna can reduce its performance both in terms of gain and bandwidth. Adding grounded metal to the sides of the antenna can improve the antennaās bandwidth.
Sales tax is required in many states and will be added at checkout if applicable to your delivery state. Tax exempt forms can be sent to our support department.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Raspberry Pi Pico W
Raspberry Pi Pico W
See full data sheet
Pico development
Added documentation
Choose from 1-pack or 3-pack with FREE US shipping at checkout.Ā
The RaspberryĀ PiĀ Pico series is a range of tiny, fast, and versatile boards built using RP2040, the flagship microcontroller chip designed by RaspberryĀ Pi in the UK
Model: Pico W (with wireless)
Raspberry Pi Pico W adds on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW43439 while retaining the Pico form factor. The on-board 2.4GHz wireless interface has the following features:
-
Wireless (802.11n), single-band (2.4 GHz)
-
WPA3
-
Soft access point supporting up to four clients
The antenna is an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected via SPI to theĀ RP2040Ā microcontroller.
Due to pin limitations, some of the wireless interface pins are shared. The CLK is shared with VSYS monitor, so only when there isnāt an SPI transaction in progress can VSYS be read via the ADC. The Infineon CYW43439 DIN/DOUT and IRQ all share one pin on the RP2040. Only when an SPI transaction isnāt in progress is it suitable to check for IRQs. The interface typically runs at 33MHz.
For best wireless performance, the antenna should be in free space. For instance, putting metal under or close by the antenna can reduce its performance both in terms of gain and bandwidth. Adding grounded metal to the sides of the antenna can improve the antennaās bandwidth.
Sales tax is required in many states and will be added at checkout if applicable to your delivery state. Tax exempt forms can be sent to our support department.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
See full data sheet
Pico development
Added documentation
Choose from 1-pack or 3-pack with FREE US shipping at checkout.Ā
The RaspberryĀ PiĀ Pico series is a range of tiny, fast, and versatile boards built using RP2040, the flagship microcontroller chip designed by RaspberryĀ Pi in the UK
Model: Pico W (with wireless)
Raspberry Pi Pico W adds on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW43439 while retaining the Pico form factor. The on-board 2.4GHz wireless interface has the following features:
-
Wireless (802.11n), single-band (2.4 GHz)
-
WPA3
-
Soft access point supporting up to four clients
The antenna is an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected via SPI to theĀ RP2040Ā microcontroller.
Due to pin limitations, some of the wireless interface pins are shared. The CLK is shared with VSYS monitor, so only when there isnāt an SPI transaction in progress can VSYS be read via the ADC. The Infineon CYW43439 DIN/DOUT and IRQ all share one pin on the RP2040. Only when an SPI transaction isnāt in progress is it suitable to check for IRQs. The interface typically runs at 33MHz.
For best wireless performance, the antenna should be in free space. For instance, putting metal under or close by the antenna can reduce its performance both in terms of gain and bandwidth. Adding grounded metal to the sides of the antenna can improve the antennaās bandwidth.
Sales tax is required in many states and will be added at checkout if applicable to your delivery state. Tax exempt forms can be sent to our support department.
